Update installer

packages/calamares-extensions/config/modules/users.conf

@@ -1,145 +1,23 @@
 # SPDX-FileCopyrightText: no
 # SPDX-License-Identifier: CC0-1.0
 #
-# Configuration for the one-user-system user module.
-#
-# Besides these settings, the users module also places the following
-# keys into the Global Storage area, based on user input in the view step.
-#
-# - hostname
-# - username
-# - password (obscured)
-# - autologinUser (if enabled, set to username)
-#
-# These Global Storage keys are set when the configuration for this module
-# is read and when they are modified in the UI.
 ---
-### GROUPS CONFIGURATION
-#
-# The system has groups of uses. Some special groups must be
-# created during installation. Optionally, there are special
-# groups for users who can use sudo and for supporting autologin.
-
-# Used as default groups for the created user.
-# Adjust to your Distribution defaults.
-#
-# Each entry in the *defaultGroups* list is either:
-#   - a string, naming a group; this is a **non**-system group
-#     which does not need to exist in the target system; if it
-#     does not exist, it will be created.
-#   - an entry with subkeys *name*, *must_exist* and *system*;
-#     if the group *must_exist* and does not, an error is thrown
-#     and the installation fails.
-#
-#     The group is created if it does not exist, and it is
-#     created as a system group (GID < 1000) or user group
-#     (GID >= 1000) depending on the value of *system*.
 defaultGroups:
-    - users
-    - networkmanager
-    - wheel
-
-### ROOT AND SUDO
-#
-# Some distributions have a root user enabled for login. Others
-# rely entirely on sudo or similar mechanisms to raise privileges.
-
-# Setting this to false, causes the root account to be disabled.
-# When disabled, hides the "Use the same password for administrator"
-# checkbox. Also hides the "Choose a password" and associated text-inputs.
+  - users
+  - networkmanager
+  - wheel
 setRootPassword: false
-
-
-### PASSWORDS AND LOGIN
-#
-# Autologin is convenient for single-user systems, but depends on
-# the location of the machine if it is practical. "Password strength"
-# measures measures might improve security by enforcing hard-to-guess
-# passwords, or might encourage a post-it-under-the-keyboard approach.
-# Distributions are free to steer their users to one kind of password
-# or another. Weak(er) passwords may be allowed, may cause a warning,
-# or may be forbidden entirely.
-
-# You can control the initial state for the 'autologin checkbox' here.
-# Possible values are:
-#  - true to check or
-#  - false to uncheck
-# These set the **initial** state of the checkbox.
-doAutologin:     true
-
-
-# User settings
-#
-# The user can enter a username, but there are some other
-# hidden settings for the user which are configurable in Calamares.
-#
-# Key *user* has the following sub-keys:
-#
-# - *shell* Shell to be used for the regular user of the target system.
-#   There are three possible kinds of settings:
-#    - unset (i.e. commented out, the default), act as if set to /bin/bash
-#    - empty (explicit), don't pass shell information to useradd at all
-#      and rely on a correct configuration file in /etc/default/useradd
-#    - set, non-empty, use that path as shell. No validation is done
-#      that the shell actually exists or is executable.
-# - *forbidden_names* Login names that may not be used. This list always
-#   contains "root" and "nobody", but may be extended to list other special
-#   names for a given distro (eg. "video", or "mysql" might not be a valid
-#   end-user login name).
+doAutologin: true
 user:
   shell: /run/current-system/sw/bin/bash
   forbidden_names: [ root ]
-
-
-# Hostname settings
-#
-# The user can enter a hostname; this is configured into the system
-# in some way. There are settings for how a hostname is guessed (as
-# a default / suggestion) and where (or how) the hostname is set in
-# the target system.
-#
-# Key *hostname* has the following sub-keys:
-#
-# - *location* How the hostname is set in the target system:
-#   - *None*, to not set the hostname at all
-#   - *EtcFile*, to write to `/etc/hostname` directly
-#   - *Etc*, identical to above
-#   - *Hostnamed*, to use systemd hostnamed(1) over DBus
-#   - *Transient*, to remove `/etc/hostname` from the target
-#   The default is *EtcFile*. Setting this to *None* or *Transient* will
-#   hide the hostname field.
-# - *writeHostsFile* Should /etc/hosts be written with a hostname for
-#   this machine (also adds localhost and some ipv6 standard entries).
-#   Defaults to *true*.
-# - *template* Is a simple template for making a suggestion for the
-#   hostname, based on user data. The default is "${first}-${product}".
-#   This is used only if the hostname field is shown. KMacroExpander is
-#   used; write `${key}` where `key` is one of the following:
-#   - *first* User's first name (whatever is first in the User Name field,
-#     which is first-in-order but not necessarily a "first name" as in
-#     "given name" or "name by which you call someone"; beware of western bias)
-#   - *name* All the text in the User Name field.
-#   - *login* The login name (which may be suggested based on User Name)
-#   - *product* The hardware product, based on DMI data
-#   - *product2* The product as described by Qt
-#   - *cpu* CPU name
-#   - *host* Current hostname (which may be a transient hostname)
-#   Literal text in the template is preserved. Calamares tries to map
-#   `${key}` values to something that will fit in a hostname, but does not
-#   apply the same to literal text in the template. Do not use invalid
-#   characters in the literal text, or no suggeston will be done.
-# - *forbidden_names* lists hostnames that may not be used. This list
-#   always contains "localhost", but may list others that are unsuitable
-#   or broken in special ways.
 hostname:
   location: None
   writeHostsFile: false
   forbidden_names: [ localhost ]
 
 presets:
-    fullName:
-        # value: "OEM User"
-        editable: true
-    loginName:
-        # value: "oem"
-        editable: true
+  fullName:
+    editable: true
+  loginName:
+    editable: true